U.S. CUSTOMS · COUNTRY OF ORIGIN · MADE IN CHINA MARKING

U.S. Country of Origin Marking for Imports from China

For most foreign-origin goods entering the United States, country-of-origin marking is not optional packaging decoration. It is a customs requirement designed to tell the ultimate purchaser in the United States the English name of the product’s country of origin.

19 U.S.C. §130419 CFR Part 134Ultimate purchaser10% additional marking duty

Official-source methodology · Federal Register / CBP / eCFR · Last verified November 19, 2026

QUICK ANSWER

What the rule requires

For ordinary China-origin merchandise, a clear “Made in China” or an equivalent accurate marking can often satisfy the basic concept. The actual rule still depends on the product, the origin determination, how the article is sold and whether other geographic references could mislead the purchaser.

Under 19 U.S.C. §1304 and 19 CFR 134.11, a foreign-origin article — or its container where the rules allow — generally must be marked:

The statutory marking conditions

  • In a conspicuous place
  • Legibly
  • Indelibly
  • As permanently as the nature of the article or container permits
  • With the English name of the country of origin
  • So the ultimate purchaser in the United States can determine the origin

Country-of-origin marking is separate from tariff classification, Section 301 applicability, FDA / CPSC / FCC labeling, marketplace labeling and FTC “Made in USA” advertising claims.

Those systems can overlap, but one does not automatically satisfy the others. A compliant customs marking is not a marketing authorisation, and a marketplace label is not a customs marking.

ORIGIN FIRST

Start with origin, not with the label

Before deciding where to print “Made in China”, determine whether China is actually the country of origin for the relevant U.S. customs rule.

For goods made entirely in one country this can be straightforward. For multi-country production it can be more complex.

The general substantial-transformation concept

In many non-preferential origin situations, CBP considers whether processing creates a new and different article with a different name, character or use. That is a working concept, not a universal one-line formula for every product. Special origin rules can apply to particular products, trade programs and countries.

Situations that require review

  • Chinese components assembled in Vietnam
  • Fabric from China cut and sewn elsewhere
  • Electronics with components from several countries
  • Machinery assembled from imported subassemblies
  • Products substantially processed in the United States after import

If origin is uncertain, obtain the product facts and consider a broker, customs adviser or CBP ruling rather than printing a label based only on shipping origin.

THE TEST

What compliant marking needs to accomplish

The basic question is whether the ultimate purchaser can find and understand the origin marking without unreasonable difficulty.

Five practical tests that map back to the statutory marking conditions.
TestQuestion to answer before printing
VisibilityCan the marking be found under normal handling and sale conditions?
LegibilityCan the purchaser read the country name clearly?
PermanenceIs the marking durable enough for the nature of the product and packaging?
AccuracyDoes the country shown match the legally determined origin?
TimingWill the compliant marking still be present when the imported article reaches the ultimate purchaser, unless an exception applies?
LOCALITY REFERENCES

“Made in China” versus a U.S. address on the product

A common private-label risk is a package that prominently shows a U.S. city or “Designed in USA” while the origin marking is tiny, remote or absent.

19 CFR 134.46 addresses cases where a U.S. place name, “United States”, “American”, “U.S.A.” or another non-origin locality appears and may mislead or deceive the ultimate purchaser. In that situation the actual country of origin must appear:

  • legibly and permanently;
  • in close proximity to the potentially misleading geographic reference;
  • in at least a comparable size;
  • preceded by wording such as “Made in” or “Product of”, or similar language.

If a retail box says “Designed in California” for a China-origin product, review the package against the special proximity rule instead of hiding “China” on a distant bottom panel.

TWO DIFFERENT SYSTEMS

CBP marking and FTC “Made in USA” are not the same rule

This distinction matters most for China-origin private-label products, where the packaging team and the marketing team are usually different people.

CBP

CBP administers the foreign-origin marking rules for imported articles. The question is which country name the marking must show.

FTC

The Federal Trade Commission regulates U.S.-origin marketing claims. For an unqualified “Made in USA” claim, the FTC uses an “all or virtually all” standard.

A product can satisfy CBP customs-origin treatment and still fail the FTC standard for an unqualified Made in USA claim. Do not reason that because CBP treats the product as U.S.-origin it can therefore be advertised as Made in USA, and do not reason in the reverse direction either.

Keep these as two separate review questions:

  1. What country of origin must CBP marking show?
  2. What U.S.-origin marketing claim, if any, can the company substantiate under FTC rules?
ULTIMATE PURCHASER

Who is the ultimate purchaser?

The required marking is intended for the ultimate purchaser in the United States. The identity of that purchaser can depend on what happens to the goods after import.

Do not assume the importer is always the ultimate purchaser.
SituationWho may be the ultimate purchaser
A finished consumer product sold unchangedThe retail consumer may be the ultimate purchaser.
An article substantially transformed in the United StatesThe U.S. manufacturer or processor may be the ultimate purchaser, depending on the legal facts and any applicable exception.
ARTICLE OR CONTAINER

Article marking versus container marking

The default rule focuses on the article itself.

The statute and Part 134 contain exceptions where container marking can satisfy the requirement, or where article marking is otherwise excepted. Because those exceptions depend on facts, avoid the blanket statement that outer carton marking is always enough.

For retail-ready consumer products, the safest planning assumption is to confirm before production whether the article, the retail package, or both need marking.

AFTER IMPORT

Repacking, kitting and FBA prep

Repacking creates a practical compliance risk that has nothing to do with the factory.

If goods arrive with compliant marking but are later repacked, relabeled, kitted, placed in new retail cartons or reworked by a prep centre, the process must not destroy the country-of-origin information required for the ultimate purchaser.

For a China-origin shipment going through a U.S. 3PL or FBA prep operation, include origin marking in the repack instructions.

Do not treat FBA labeling as a substitute for country-of-origin marking. A marketplace barcode, FNSKU, suffocation warning or warehouse label does not replace it.

NON-COMPLIANCE

What happens if CBP finds the marking is not legal

Two consequences are commonly confused: the correction procedure and the statutory additional duty.

Under 19 CFR 134.51, when articles or containers are found not legally marked, CBP can notify the importer using CBP Form 4647 or its electronic equivalent to arrange proper marking, or redelivery for marking, exportation or destruction. Corrective work can be subject to customs supervision and importer expense.

Additional marking duty

19 U.S.C. §1304(i) provides for an additional 10% ad valorem marking duty when required marking is not corrected through the statutory procedures before liquidation. This is separate from ordinary customs duty.

Do not present this as a routine fine. It is a statutory additional marking duty with its own conditions.

WORKFLOW

China-origin labelling workflow

Four checkpoints, each cheaper than the one after it.

  1. 01

    Before production

    Confirm the product manufacturing countries, the likely U.S. origin treatment, the retail packaging design, every U.S. address, flag or “Designed in USA” reference, and the product-specific labelling laws that also apply.

  2. 02

    Before mass printing

    Approve the exact origin phrase, placement, size, contrast, permanence, and whether the article, the package or both carry the marking.

  3. 03

    Before pickup

    Check a production sample or QC photo for the correct country name, no conflicting origin references, and marking that stays visible after FBA or 3PL labels are applied.

  4. 04

    Before entry

    The commercial invoice, the product marking and the customs-origin declaration should not contradict one another.

PRIVATE-LABEL EXAMPLE

A Shenzhen kitchenware factory and a U.S. brand

The item is manufactured in China. The retail box shows the U.S. brand name, an Austin, Texas customer-service address and “Designed in USA”. The review below should happen before 10,000 cartons are printed.

Questions to answer

  • Is China the correct customs origin?
  • Is the country marking on the article, the box or both, as required?
  • Does the Texas or USA wording trigger the 19 CFR 134.46 proximity rule?
  • Is “Made in China” close enough and at least comparable in size where required?
  • Does the online product page make an implied U.S.-origin claim that creates an FTC issue?
  • Will any 3PL relabeling cover the origin mark?
MARKETPLACE SHIPMENTS

Amazon FBA and marketplace imports

Amazon policy and U.S. customs law are separate systems, and satisfying one does not satisfy the other.

FBA-bound imports

  • Approve origin marking before shipment
  • Tell the prep centre not to cover it
  • Reconcile item, retail package and master carton
  • Separately meet Amazon’s current inbound labelling rules
COMMON MISTAKES

Where origin marking usually fails

Each row below is a pattern that recurs in China-origin private-label programmes.

Common failure patterns and the corresponding control.
MistakeBetter approach
Marking only “PRC” without confirming acceptability for the specific contextUse a clear English country name and obtain shipment-specific advice where needed.
Country mark hidden under a barcode labelTreat marking visibility as a label-placement constraint.
U.S. city printed prominently, origin far awayReview the 19 CFR 134.46 close-proximity and comparable-size rule.
Origin based only on port of exportDetermine origin from the production facts.
Only the master carton markedConfirm whether an article-level exception actually applies.
U.S. repack removes the markPreserve compliant origin information through repacking.
“Made in USA” added because final packaging occurred in the U.S.Apply the FTC U.S.-origin claim rules separately.
CHECKLIST

Country-of-origin marking readiness

Use this before the carton artwork is released and again before the shipment is handed to the broker.

Origin

  • Manufacturing countries documented
  • Origin determination reviewed
  • Product-specific origin rule checked

Marking

  • English country name selected
  • Marking location is conspicuous
  • Text is legible
  • Marking is sufficiently permanent
  • Ultimate purchaser identified

Locality references

  • U.S. geographic references reviewed
  • 19 CFR 134.46 proximity issue checked
  • Container exception confirmed if relying on container-only marking

Downstream

  • 3PL or FBA relabeling will not cover the mark
  • Commercial invoice origin matches the supported customs position
COMMON QUESTIONS

Country of origin marking FAQ

Do all imported products need “Made in China” printed on the product?

The general rule requires foreign-origin articles to be marked unless an exception applies. Whether the article itself or a container can satisfy the requirement depends on the facts and on 19 CFR Part 134.

Can I put a U.S. address on a China-made product?

A U.S. address is not automatically prohibited, but if a U.S. place reference could mislead the purchaser about origin, 19 CFR 134.46 can require the true origin to appear in close proximity and at comparable size with “Made in,” “Product of,” or similar wording.

Is country of origin the same as where the shipment departs?

No. Shipping origin and customs origin are different concepts, and a transshipment port does not change the origin of the goods.

Does repacking in the U.S. change origin?

Ordinary repacking by itself does not automatically change the customs origin of the product. A substantive manufacturing transformation may require a separate analysis.

Does CBP origin allow a “Made in USA” marketing claim?

Not automatically. FTC standards for U.S.-origin advertising are a separate review and can be stricter than the customs marking rule.

CHINA-ORIGIN FREIGHT

Resolve origin marking before the cartons leave the factory

DDP Atlas can coordinate factory pickup, QC-photo workflows, consolidation and shipment handoff. The importer and qualified compliance professionals remain responsible for the legal origin determination and labelling requirements.

Get a Freight Estimate →

Scope notice

This page is general import-planning information, not a CBP ruling, an FTC opinion or legal advice. Country of origin can depend on product-specific facts and special rules. Obtain shipment-specific guidance when the origin or the marking exception is uncertain.