CHINA → USA · HTS · SECTION 301 · TRADE REMEDIES · FEES

U.S. Import Duties from China: How the Current Tariff Stack Works

There is no single universal “China import duty”. The amount payable depends on several separate layers, and every one of them is tied to the entry date. This page shows the order of review, the current official references, and where a rate must stay marked unknown.

2026 HTS Revision 23Section 301 exclusions to January 9, 2027FY2027 MPF limitsEntry date is a required input

Official-source methodology · Federal Register / CBP / eCFR · Last verified November 19, 2026

QUICK ANSWER

Use a layered review, in this order

Each layer answers a different question. Skipping a layer is how a wrong duty number gets quoted with confidence.

A product name is not enough to answer the full stack.
LayerQuestion it answers
HTSWhat is the complete U.S. tariff classification?
Customs valueWhat is the legally supportable appraised value?
Base dutyWhat Column 1 General rate applies?
Section 301Does a China-origin Chapter 99 measure apply?
ExclusionIs there a current exclusion that matches the exact product and HTS conditions?
Section 232Is the merchandise covered by a current Section 232 measure?
AD/CVDIs the product within the written scope of a Commerce order?
MPFWhat processing fee applies to this entry?
HMFIs this applicable commercial vessel cargo at a covered port?
OtherDoes another agency impose a tax, fee, quota or special requirement?
2026 UPDATE

Do not use outdated IEEPA add-on tables

On February 20, 2026, Executive Order 14389 ended the additional ad valorem duties imposed under the listed IEEPA tariff executive orders, including the 2025 China synthetic-opioid tariff action and the reciprocal-tariff action.

What ended

An old calculator or article that simply adds the former IEEPA percentages to every China-origin product can now be wrong.

What did not end

The order explicitly states that it does not terminate other duties such as Section 232 and Section 301, and that the separate February 20, 2026 action continuing the suspension of duty-free de minimis treatment was unaffected.

Operational rule: treat the entry date as a required tariff input. A rate that was correct in 2025 may not be correct on a 2026 or 2027 entry.

LAYER 1

Find the complete U.S. HTS classification

The U.S. International Trade Commission maintains the Harmonized Tariff Schedule of the United States. As of November 19, 2026 the online HTS displayed 2026 HTS Revision 23.

Start from the merchandise

  • Exact merchandise description
  • Material and composition
  • Construction
  • Function and intended use
  • Model or SKU
  • Country of origin

Then verify the tariff line

  • Full ten-digit statistical reporting number
  • Chapter and section notes that affect the line
  • Any Chapter 99 measure referenced by the provision

HS code lookup and tariff verification → — a classification starting point, not a binding customs ruling, and not a replacement for the full USITC tariff.

LAYER 2

Establish customs value correctly

For U.S. customs purposes, do not automatically calculate duty on a CIF total.

Under 19 U.S.C. §1401a, transaction value is the primary appraisement method when its statutory conditions are met. The statute defines the price actually paid or payable in a way that excludes international transportation, insurance and related international-shipment services, while separately requiring specified additions where applicable.

CBP also explains that a CIF price is not automatically the value on which U.S. duty is assessed.
Statutory additions to watchWhy it matters for a China purchase
Packing costsOften bundled into the unit price without being identified.
Selling commissionsDistinct from buying commissions; confirm which one applies.
AssistsTooling, moulds, design work or materials supplied free or at reduced cost.
Royalties and licence feesPayable as a condition of sale of the imported merchandise.
Resale proceeds accruing to the sellerAny portion of the subsequent resale that returns to the seller.

Calculator note: the DDP Atlas Landed Cost Calculator is a planning calculator, not a customs-value determination. It asks for the customs value used for duty as its own input — do not treat a planning “goods + freight + insurance” total as though CBP had approved it as transaction value.

Read the full U.S. Customs Valuation guide → — transaction value, the five statutory additions, freight and insurance treatment, assists, related parties and First Sale.

LAYER 3

Apply the ordinary HTS duty rate — with its revision

After classification and valuation are established, identify the applicable ordinary tariff rate in the current U.S. HTS.

Do not store only HTS code → one permanent rate. A professional tariff record should retain:

HTS revisionFull tariff lineArticle descriptionDuty-rate typeEffective dateSource URLLast verified date

The HTS changes during the year. A static rate without a revision date becomes stale evidence.

LAYER 4

Check Section 301 for China-origin goods

Section 301 additional duties remain separate from the IEEPA tariffs ended in February 2026. USTR’s China programme includes multiple tariff actions and Chapter 99 provisions.

Six questions for a Section 301 review

  • Is the product China-origin for the relevant measure?
  • What is the full HTSUS classification?
  • Does the relevant Chapter 99 provision apply?
  • Is an exclusion currently active?
  • Does the product satisfy the exact exclusion wording and classification conditions?
  • What is the entry date?

Do not

  • Use a generic product category such as “electronics” or “furniture” as proof of status
  • Assume a six-digit HS match settles the measure
  • Reuse a percentage from an article that predates the current action

Section 301 tariff and exclusion check, HTS by HTS →

EXCLUSIONS

The current Section 301 exclusion window

USTR has extended 178 current exclusions through 11:59 p.m. Eastern Time on January 9, 2027.

The notice states that the scope of the exclusions is governed by the relevant ten-digit HTSUS statistical reporting numbers and the product descriptions in the specified U.S. notes.

Do not overstate an exclusion. A product is not excluded merely because its general description sounds similar, because the six-digit HS code looks similar, or because someone says “this category is exempt”. Match the exact legal description and classification conditions — and note that the window closes on January 9, 2027.

LAYER 5

Check Section 232 separately

Section 232 is a different legal programme from Section 301. Certain merchandise can be subject to current Section 232 measures based on the product, tariff provision, country treatment and the current Presidential, Commerce and CBP implementation rules.

Because coverage and rates change, this page does not hard-code one universal Section 232 percentage. A publishing workflow should store a verified, dated treatment for the specific product instead.

When a product may be affected, check

  • Current HTS and Chapter 99 notes
  • Current CBP trade-remedy implementation guidance
  • Current Presidential proclamations and orders
  • Any relevant Commerce determinations

Record for each product

  • Measure and legal basis
  • Rate or treatment
  • Effective date
  • Source
  • Last verified date
LAYER 6

Screen for AD/CVD by written scope, not HTS alone

The Department of Commerce explains that the written scope description controls whether merchandise is covered. HTS classifications in an order are useful references but are not by themselves dispositive.

Screen inputWhy it is needed
Product descriptionCompared against the written scope language.
Physical and technical characteristicsScope often turns on dimensions, composition or performance.
CountryOrder coverage is country-specific.
Producer and exporterRates can be company-specific.
Case or orderDetermines which scope and instructions apply.
Cash-deposit instructionsThe operative rate for the entry, not the headline rate.

Do not publish a guessed AD/CVD rate. If the scope or rate is uncertain, show “AD/CVD review required — rate not established” rather than inventing a percentage. Official search: access.trade.gov/adcvd ↗

LAYER 7

Merchandise Processing Fee (MPF)

For formal entries the ad valorem MPF rate remains 0.3464%. For Fiscal Year 2027, CBP’s Federal Register notice sets the formal-entry minimum and maximum at the values below.

Store MPF as a dated rule — rate, minimum, maximum, fiscal year, effective date, source and any exemption note.
ItemFY2027 valueNotes
MPF rate0.3464%Ad valorem, formal entries
Minimum$34.58Per formal entry
Maximum$670.86Per formal entry
EffectiveOctober 1, 2026Start of fiscal year 2027

Rate and limitations can have exemptions or special treatment under applicable trade programmes. Do not apply the fee mechanically without checking the entry.

LAYER 8

Harbor Maintenance Fee (HMF)

Under 19 CFR 24.24, commercial cargo loaded or unloaded from a commercial vessel at a covered port is generally subject to a Harbor Maintenance Fee of 0.125% of value, subject to exemptions and special rules.

Where it belongs

HMF is a vessel and port-use fee. Show it as a separate government-fee line in an ocean-versus-air comparison rather than hiding it inside freight.

Where it does not

Do not apply HMF to ordinary air imports, and do not assume coverage without checking the port and the cargo.

WORKSHEET

Build a duty review without inventing a rate

Do not start with “China duty = X%”. Start with the worksheet, and leave a field blank until it is verified.

Product facts

  • Product and material composition
  • Function
  • Full U.S. HTS
  • Country of origin — China / other / needs review
  • Entry date

Customs value

  • Transaction-value basis reviewed: yes / no
  • International freight separately identified: yes / no
  • Assists, royalties, packing and other additions reviewed: yes / no
  • Planning customs value
Duty stack lineState
Base HTS dutyPercentage, once the tariff line is verified
Section 301Percentage / not applicable / unknown
Section 301 exclusionVerified / no / unknown
Section 232Percentage / not applicable / review required
AD/CVDRate / not applicable / scope review required
MPFCalculated under the current FY limits
HMFApplicable / not applicable
Other government chargesNamed, or “none identified”

Confidence state: mark each line as verified from an official source, broker or adviser review required, or unknown — do not calculate yet. That is safer than a single “tariff calculator” that silently guesses classifications and trade remedies.

LANDED COST

Landed cost is broader than customs duty

Customs value and total landed cost are not the same number, and one should never be presented as the other.

product cost + China pickup + origin handling + international freight + insurance + customs duties + government fees + broker and bond + terminal and port costs + inland delivery + warehouse and appointment costs

Landed cost calculator → — a planning tool. Keep its result labelled as a planning result unless the customs inputs have been independently verified.

BEFORE THE PURCHASE ORDER

Pre-order duty checklist

Run this before a high-value purchase order, not after the goods are booked.

Product and classification

  • Obtain complete SKU specifications
  • Confirm country of origin
  • Verify the full U.S. HTS classification
  • Check the current HTS revision

Value and remedies

  • Confirm the customs-value method
  • Screen Section 301
  • Check active exclusion language
  • Screen Section 232
  • Screen AD/CVD

Fees and other charges

  • Check product-agency charges or controls
  • Apply current MPF limits
  • Apply HMF only when legally applicable

Record hygiene

  • Separate customs charges from freight charges
  • Re-check the stack if the entry date changes materially
NEXT STEP

Connect the duty review to the freight plan

Once the importer has verified the customs inputs, those inputs can drive the shipment-planning workflow.

Keep the two conversations separate: the freight quotation prices movement, and the duty review prices the government charge. Both belong in the same landed-cost picture, but they are not interchangeable.

COMMON QUESTIONS

China-to-USA import duty FAQ

What is the current import duty from China to the United States?

There is no single rate. It depends on the U.S. HTS classification, the customs value, the country of origin, Section 301, other trade remedies, active exclusions, fees and the entry date.

Are the 2025 IEEPA China tariffs still added to every import?

No. Executive Order 14389 ended the additional ad valorem duties imposed under the listed IEEPA tariff actions in February 2026. Other duties, including Section 301 and Section 232, were not ended by that order.

Is Section 301 still relevant?

Yes. USTR continues to maintain the China Section 301 tariff actions, subject to current modifications and exclusions.

When do the 178 current Section 301 exclusions expire?

The current USTR notice extends them through 11:59 p.m. Eastern Time on January 9, 2027.

Can I determine AD/CVD from an HTS code?

Not reliably. Commerce states that the written scope description controls; HTS numbers are included in an order for convenience.

Is ocean freight included in U.S. customs value?

Do not automatically add international freight and insurance to transaction value. Under 19 U.S.C. §1401a and CBP guidance, international transportation and insurance can be excluded from the price actually paid or payable under the statutory rules. Confirm the actual valuation method for the entry.

CHINA-ORIGIN FREIGHT

Price the duty layer before you commit to the order

A duty review is a planning step, not a quotation. DDP Atlas coordinates freight, consolidation and delivery within the agreed scope; classification, valuation and the applicable rate must be confirmed by the importer and the licensed broker.

Get a Freight Estimate →

Scope notice

This page is a tariff-planning framework, not a customs ruling or a guaranteed duty calculation. The HTS, Chapter 99 measures, exclusions, Presidential actions, AD/CVD instructions, fee limits and entry facts can change. Verify the actual product and entry date with current official sources and the responsible customs professional before relying on a duty amount.